California Bids > Bid Detail

OWIS Monitors & Controller

Agency: ENERGY, DEPARTMENT OF
Level of Government: Federal
Category:
  • A - Research and development
Opps ID: NBD00159732137983659
Posted Date: Dec 16, 2022
Due Date: Dec 20, 2022
Solicitation No: 0000334947
Source: https://sam.gov/opp/b1d2b0eda4...
Follow
OWIS Monitors & Controller
Active
Contract Opportunity
Notice ID
0000334947
Related Notice
Department/Ind. Agency
ENERGY, DEPARTMENT OF
Sub-tier
ENERGY, DEPARTMENT OF
Office
SLAC Natl Accel Lab -DOE Contractor
Looking for contract opportunity help?

Procurement Technical Assistance Centers (PTACs) are an official government contracting resource for small businesses. Find your local PTAC (opens in new window) for free government expertise related to contract opportunities.

General Information
  • Contract Opportunity Type: Combined Synopsis/Solicitation (Original)
  • All Dates/Times are: (UTC-08:00) PACIFIC STANDARD TIME, LOS ANGELES, USA
  • Original Published Date: Dec 15, 2022 05:16 pm PST
  • Original Date Offers Due: Dec 20, 2022 10:00 am PST
  • Inactive Policy: Manual
  • Original Inactive Date: Dec 21, 2022
  • Initiative:
    • None
Classification
  • Original Set Aside:
  • Product Service Code: AG13 - Energy R&D Services; Energy Supply; Experimental Development
  • NAICS Code:
    • 335312 - Motor and Generator Manufacturing
  • Place of Performance:
    Menlo Park , CA 94025
    USA
Description

SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions.



SLAC has a requirement for a U.S. domestic end item source of the following:




  1. Qty: 1, high precision linear 2-phase stepper motor stage, mechanical limit switches or comparable, 50mm travel, vacuum-compatible

    1. motor width:70.3mm

    2. motor length:227.Smm

    3. motor weight: 1.1-1.7kg

    4. cart width:59.4mm

    5. cart length:60mm

    6. cart hole pattern: M4 square

    7. cart torque load: up to 7.5Nm

    8. cart velocity: up to lOmm/s



  2. Qty: 1, high precision linear 2-phase stepper motor stage, mechanical limit switches or comparable, 95-lO0mm travel, vacuum-compatible

    1. motor width:70.3mm

    2. motor length:252.Smm

    3. motor weight: 1.1-1.7kg

    4. cart width:59.4mm

    5. cart length:60mm

    6. cart hole pattern: M4 square

    7. cart torque load: up to 7.5Nm

    8. cart velocity: up to l0mm/s



  3. Qty: 1, high precision linear 2-phase stepper motor stage, mechanical limit switches or comparable, 145-lS0mm travel, vacuum-compatible

    1. motor width: 70.3m m

    2. motor length: 302.8mm

    3. motor weight: 1.1-1.7kg

    4. cart width:59.4mm

    5. cart length:60mm

    6. cart hole pattern: M4 square

    7. cart torque load: up to 7.5Nm

    8. cart velocity: up to l0mm/s



  4. Qty: 1, Controller Unit

    1. 9 Drive Modules for 2-phase step motor (open loop)

    2. 48 V/480 W, with 9 Drive Modules

    3. 8 TTL inputs 0-5 V

    4. 8 analog inputs 0-4,096 voe, resolution 10 bit

    5. 8 SPS inputs 0-24 V

    6. 8 TTL outputs 0-5 V /10 mA

    7. 8 analog outputs 0-4,096/10 VDC/mA, resolution 10 bit

    8. 8 SPS outputs 0-24V, 300 mA

    9. axes 1, 4 and 7 with motor-brake

    10. 1 input for external emergency stop

    11. evaluation of measuring systems for 9 axes

    12. Power supply unit 100-240 VAC

    13. interfaces: USB 2.0, serial and Ethernet {RJ45) with switch function



  5. Qty: 9, connector cable from controller to high precision linear 2-phase stepper motor stages

    1. 3 m long shielded

    2. for 2-phase step motor up to 1.8 A compatible with controller unit







The award will be made based upon the attached Lowest Price Technically Acceptable method.



Marking of Proprietary/Confidential Information. Offerors shall properly mark and identify with a restrictive legend or information markings on pages of the proposal that contain Proprietary/confidential information.



For Offeror to be eligible for a subcontract award with the University and the U.S. Department of Energy (DOE), Offeror shall be registered with the System for Award Management (SAM). Entities may register at no cost directly at the SAM website: https://www.sam.gov.



The resulting purchase order shall be performed in accordance with SLAC National Accelerator Laboratory's Terms and Conditions for Fixed Price Commercial Supplies and Services dated November 2022.



NOTE: The following documents are attached in this solicitation.




  1. Buy American Act Certificate

  2. Terms & Conditions for Fixed Price Commercial Supplies and Services, November 2022

  3. Source Selection Plan Req #334947



Please provide quoted price, delivery, technical compliance statement and certification to the attention of Marissa Tanomrat,



Payment Terms: Net 30 days



Freight terms: FOB Destination Prepaid and Add




Attachments/Links
Attachments
Document File Size Access Updated Date
BAA_Certification.pdf (opens in new window)
65 KB
Public
Dec 15, 2022
FPSS_Terms_and_Conditions_Nov2022.pdf (opens in new window)
325 KB
Public
Dec 15, 2022
Source_Selection_Plan_Req.334947.pdf (opens in new window)
13 KB
Public
Dec 15, 2022
file uploads

Contact Information
Contracting Office Address
  • 2575 Sand Hill Road
  • Menlo Park , CA 94025
  • USA
Primary Point of Contact
Secondary Point of Contact
History
  • Dec 15, 2022 05:16 pm PSTCombined Synopsis/Solicitation (Original)

TRY FOR FREE

Not a USAOPPS Member Yet?

Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.

Start Free Trial Today >