Active

Contract Opportunity

Opportunity:

Lawrence Livermore National Laboratory (LLNL), operated by the Lawrence Livermore National Security (LLNS), LLC under contract no. DE-AC52-07NA27344 (Contract 44) with the U.S. Department of Energy (DOE), is offering the opportunity to enter into a collaboration to further develop and commercialize its novel method of additively manufacturing high strength and stiffness fiber-reinforced inorganic glass composites.

Background:

Inorganic glass is a transparent functional material integrated into opto-electronic devices such as optical fibers, semiconductors, solar cells, transparent photovoltaic devices, or photonic crystals and in smart materials applications such as environmental, pharmaceutical, and medical sensors. Carbon, glass, and ceramic fiber matrix composites are multiphase materials where the reinforcing phase comprises the fibers (high strength and stiffness) and the contiguous binding phase is formed from a polymer material (either a thermoset or thermoplastic) which is orders of magnitude less stiff and strong than the fiber phase. If the “weaker” polymer material is replaced with a high strength, high stiffness, high thermal stability matrix of comparable properties to the fiber, then the resultant matrix would have both improved overall mechanical and thermal properties as compared to a fiber-polymer composite.

Description:

The approach is to combine the techniques of 3D printing aligned carbon fiber composites and melt-3D printing of glasses in a non-obvious manner to allow 3D printing (with controlled microstructure, fiber alignment, complex geometries, and advanced second order composite properties) of a new class of additively manufactured fiber-glass composites. It involves four major elements:

1. Feedstock preparation- comprises a physical combination or mixture of the glass matrix material and the reinforcing fiber.

1. Extrusion based deposition methods- could be direct powder melt and write, filament and melt deposition, laser sintering-based continuous fiber deposition, or powder bed fusion method.

1. Toolpath and geometric design optimization- computational design optimization and toolpath planning algorithm approaches are used in the design of the component to optimize performance and physical properties.

1. Annealing and post-processing- the 3D printed part may be thermally annealed to remove and reduce residual stresses.

Advantages/Benefits:

The Value Proposition is improved performance at less manufacturing costs.

• 100% recyclable but can also incorporate other industrial elements to be used as raw materials.


• Outstanding thermal and chemical resistance


• Ability to tune or enhance the thermal, electrical, or mechanical properties of the composite

Potential Applications:

• High stiffness, low coefficient of thermal expansion, high strength, lightweight structural fixtures


• Thermally resilient coatings or cases


• Reentry vehicle, thermal shield, or leading-edge material for aerospace applications


• Optical mounting fixtures for high precision optics

Development Status:

Current stage of technology development: TRL 3 (analytical and experimental critical function and/or characteristic proof of concept)

LLNL has filed for patent protection on this invention. LLNL also has a huge portfolio of 3D printing fiber-reinforced composites:

• U.S. Patent No. 9,862,140 Additive Manufacturing of Short and Mixed Fibre-Reinforced Polymer issued 1/9/2018


• U.S. Patent Application No. 2017/0015060 Additive Manufacturing Continuous Filament Carbon Fiber Epoxy Composites published 1/19/2017


• U.S. Patent No. 11,084,223 Optimal Toolpath Generation System and Method for Additively Manufactured Composite Materials issued 8/10/2021

LLNL is seeking industry partners with a demonstrated ability to bring such inventions to the market. Moving critical technology beyond the Laboratory to the commercial world helps our licensees gain a competitive edge in the marketplace. All licensing activities are conducted under policies relating to the strict nondisclosure of company proprietary information.

Please visit the IPO website at https://ipo.llnl.gov/resources for more information on working with LLNL and the industrial partnering and technology transfer process.

Note: THIS IS NOT A PROCUREMENT. Companies interested in commercializing LLNL's method of 3D printing fiber-reinforced inorganic glass composites should provide an electronic OR written statement of interest, which includes the following:

1. Company Name and address.


2. The name, address, and telephone number of a point of contact.


3. A description of corporate expertise and/or facilities relevant to commercializing this technology.

Please provide a complete electronic OR written statement to ensure consideration of your interest in LLNL's method of 3D printing fiber-reinforced inorganic glass composites.

The subject heading in an email response should include the Notice ID and/or the title of LLNL’s Technology/Business Opportunity and directed to the Primary and Secondary Point of Contacts listed below.

Written responses should be directed to:

Lawrence Livermore National Laboratory

Innovation and Partnerships Office

P.O. Box 808, L-779

Livermore, CA 94551-0808

Attention: IL-13792

Attachments/Links