ISRG Shredder Services
Agency: | DEPT OF DEFENSE |
---|---|
Level of Government: | Federal |
Category: |
|
Opps ID: | NBD00159157545339453 |
Posted Date: | Feb 22, 2023 |
Due Date: | Feb 21, 2023 |
Solicitation No: | FA468623CP002 |
Source: | https://sam.gov/opp/92f97c124a... |
Procurement Technical Assistance Centers (PTACs) are an official government contracting resource for small businesses. Find your local PTAC (opens in new window) for free government expertise related to contract opportunities.
- Contract Opportunity Type: Sources Sought (Updated)
- All Dates/Times are: (UTC-08:00) PACIFIC STANDARD TIME, LOS ANGELES, USA
- Updated Published Date: Feb 22, 2023 09:28 am PST
- Original Published Date: Feb 14, 2023 04:00 pm PST
- Updated Response Date: Feb 21, 2023 01:00 pm PST
- Original Response Date: Feb 21, 2023 01:00 pm PST
- Inactive Policy: Manual
- Updated Inactive Date: Feb 24, 2023
- Original Inactive Date:
-
Initiative:
- None
- Original Set Aside: Total Small Business Set-Aside (FAR 19.5)
- Product Service Code:
-
NAICS Code:
- 811210 - Electronic and Precision Equipment Repair and Maintenance
-
Place of Performance:
Beale AFB , CA 95903USA
Statement of Need
HDD/SSD Shredder At-Site Preventive Maintenance
. Grease all fittings, Clear cutting head of debris, adjust tension of deflectors, lubricate cutting
head, verify safety limit switches are working properly, verify gear oil in bath pan and reduction
box are at proper levels.
. Clear rails of any debris and adjust as necessary, Check tension on conveyor belt and belt
condition, Check chain that drives belt and lubricate.
. Check blast gate for proper air flow, Check HEPA and pre-filters and note condition, evaluate
fan to ensure proper rotation.
Disintegrator At-Site Preventive Maintenance 20 Point PM Sentry Plus Service
Program
. Remove old knives, sharpen spare knives, install sharpened knives, calibrate installed knives to
application for optimal performance, Grease rotor bearings, inspect hopper for easy opening and
closing to cutting chamber, inspect rotor for excessive wear, inspect screen for proper fit and
wear, inspect drive belt for wear, adjust drive belt tension to factory specifications for maximum
efficiency, Check sheave bolt tension and set to factory specifications.
. Inspect fan for proper operation, inspect evacuation system for leaks, Lubricate and grease air
system as required, adjust flow controls as needed, inspect filter, shake filter, and empty debris
if required.
. Inspect all safety switches ensuring they function properly, inspect all starters ensuring proper
operation.
. Complete evaluation report with recommendations. Run system check on overall machine
performance, Complete evaluation report with recommendations.
Paper Shredder At-Site
. Preventive Maintenance, Inspection of shredder and cabinet for visual damage or oil leaks,
inspect shred samples to ensure shredded waste meets specifications, check all functions of
system, Clean and lubricate system, clean photo-eye sensors and cutting head, Clean loose
material from cabinet and/or top cover
- CP 530 634 2109 6500 B ST RM 101
- BEALE AFB , CA 95903-1702
- USA
- Connor Peddie
- connor.peddie.1@us.af.mil
- Phone Number 5306343305
- Feb 22, 2023 09:28 am PSTSources Sought (Updated)
- Feb 14, 2023 04:00 pm PST Sources Sought (Original)
TRY FOR FREE
Not a USAOPPS Member Yet?
Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.